Skip to main content
Chat with Biamp tech support
Biamp Cornerstone

Step 3A: Evoko Home Installation on Windows Server

Evoko Home can be installed on both Windows and Linux (Debian based) servers.  The installation procedure depends on the operating system therefore please select the type of operating system which you will install Evoko Home.

Windows Server Prerequisites 

  • A server running Windows Server 2016 (or later).
  • A static IPv4 address (the Evoko Liso units will point to this IP).
  • Two free and accessible application ports (default HTTP port 3000 and HTTPS port 3002)
  • Access to booking system (e.g. Office 365) over HTTP (port 80) or HTTPS (port 443).
  • Access to NTP server over NTP (port 123 UDP).

Install Evoko Home on a Windows Server

  1. Download the newest version of Evoko Home from the Biamp Downloads site.  Product Type: Evoko, Resource Type: Software.  In this guide v2.7.6 is the most current version.
    • Screenshot 2024-06-06 at 8.15.54 AM.png
  2. You will need to run this installer as an Administrator.  To do so, right click on the downloaded file and click Run as Administrator.  Screenshot 2024-06-03 at 10.00.18 AM.png
  3. This will trigger the "single installer" which will help you install correct versions of additional software (e.g. Node.jsMongoDB etc) required to run Evoko Home.  You will want to agree to license agreement and press install. Screenshot 2024-06-03 at 10.04.13 AM.png
  4. Once the installation is finished you will be prompted to finalize the Evoko Home installation wizard.  Press Next Screenshot 2024-06-03 at 10.06.50 AM.png
  5. You will be prompted on where you would like the service to be configured.  We recommend keeping the location to the default file path.  Press Next.  Screenshot 2024-06-03 at 10.07.59 AM.png
  6. You will then be prompted to input credentials for MongoDB.  This is where all information will be stored regarding your Evoko Home instance.  It is extremely important to document these database values.  If they are lost it will be nearly impossible to recover any DB in case a future restore is needed!  After the values are added.  Press Next Screenshot 2024-06-03 at 10.10.45 AM.png
  7. Once the values for your database have been input click Next and then proceed with Install Screenshot 2024-06-03 at 10.12.06 AM.png
  8. Click Finish when the installation is complete.  Screenshot 2024-06-03 at 10.18.24 AM.png
  9. Once the installation is complete you should get an Installation Successfully Completed message.  Press Close Screenshot 2024-06-03 at 10.20.01 AM.png 
  10. Open the list of Services on the Windows Server and check for a service named ERM Service. Make sure itRunningScreenshot 2024-06-03 at 10.22.12 AM.png
  11. If the service is running and no firewall is blocking access, Evoko Home can be accessed via http://localhost:3000in your browser.   You may need to advance through the certificate warning depending on your browser.Screenshot 2024-06-03 at 10.26.19 AM.png
  12. Congrats!  You have successfully installed and accessed Evoko Home on Windows Server!  Screenshot 2024-06-03 at 10.27.29 AM.png
  13. You should now proceed with connecting your booking system to Evoko Home!  To connect with Microsoft, click here.  To connect with Google, click here.
  • Was this article helpful?