Skip to main content
Biamp Cornerstone

Restoring migrated Liso firmware to Evoko Liso firmware

This article covers restoring a migrated panel to the Evoko Liso firmware for situations such as, using the panel Evoko Home again or as part of an RMA. This workflow is only needed when a panel is in a state where normal re-provisioning cannot resolve the issue.

 

Procedure overview

  • The restoration file for this this procedure, "Evoko Liso Restore to Evoko Home", can be downloaded from the Downloads page of biamp.com under the Evoko products, Software category.
  • Use steps found in this article: How do I perform a firmware reset on an Evoko Liso? However, you must use the firmware file linked to in this article rather than the one in the in the firmware reset article.
    • Only the choice of firmware files is different. Otherwise restoring the Evoko Liso firmware uses all the same steps as described in the Restore article.

Once the Evoko Liso firmware has been restored, the panel is unprovisioned. To bring it back into Biamp Workplace, provision it using Path B (Start from Biamp Workplace) found in the Liso Migration Tool User Guide.

  • Was this article helpful?