Skip to main content
Biamp Cornerstone

Configuration

  1. Last updated
  2. Save as PDF

This article describes the Evoko Liso Configuration screen, which appears during the initial device setup or following a factory reset.

 

Configure Network

The Liso can be connected via a wired Ethernet or wireless connection, using a dynamic or static IP. By default, the Liso will connect via Ethernet and obtain an IP address automatically using DHCP once connected.

 

 

Diagnostics

This allows you to test the Evoko Liso hardware:

  • Red, Green, Yellow, and White (logo) LEDs
  • Proximity sensor
  • LAN and WiFi connectivity (if present)
  • LCD panel and touch screen
  • NFC connectivity (requires RFID card)
  • Ping Google, Evoko Home, NTP server

 

 

Update via USB

This updates the Evoko Liso using a Liso Device Upgrade firmware package.

 

 

 

Further reading

Administration

  1. Back to top
  • Was this article helpful?

Recommended articles

  1. Article type
    Reference
    Stage
    Final
  2. Tags
    This page has no tags.