Skip to main content
Biamp Systems

Restoring the Telephone Control/Status block

The Control/Status blocks of the analog telephone interface is one of the optional blocks that users can choose to deploy or not. If it becomes necessary to make changes to certain parameters in the Control/Status block once the telephone interface has already been deployed in the file without the Control/Status block, we need to restore it. This article shows how to restore the block without having to delete and re-insert the telephone interface blocks.

Audia TI-2

  • Click on the I/O blocks icon in the Object Toolbar.
  • From the list, select "Telephone Interface Blocks".
  • Click anywhere in your design to insert the block.
  • In the dialog that appears, select the telephone interface to which you want to add the Control/Status block from the drop-down menu.
  • Select "Control/Status" from the Additional Control Blocks section.
  • Click OK.

 Control-Status Audia.GIF

Nexia TC

  • Click on the down arrow next to the TC icon in the Object Toolbar.
  • From the list, select "TC Support Blocks".
  • Click anywhere in your design to insert the block.
  • In the dialog that appears, select the telephone interface to which you want to add the Control/Status block from the drop-down menu.
  • Select "Control/Status" from the Additional Control Blocks section.
  • Click OK.

Control-Status Nexia.GIF

  • Was this article helpful?