Skip to main content
Chat with Biamp tech support
Biamp Cornerstone

IR Sequence - Mute command

Always remember to fill in both the "Mute on" and "Mute off" commands.

Item

Description

The time between commands...

Defines the time between sending the first command and the second command. If the second command are not in use, this time is discharged.

The time from mute on...

Here you define the time from the last command is sent, until the device is ready for the next command.

The time from mute off...

Here you define the time from the mute off command i sent, until the device is ready to receive the next command.

 

The sequence has the following function:

When mute is off and mute key is pressed:

  1. The LED on the button start flashing.
  2. First Mute on command is sent.
  3. Wait "Time between commands..." (if a second command is available).
  4. Second Mute on command is sent. (If available).
  5. Wait "The time from mute on..." and release keyboard.
  6. The LED on the button keep flashing.

When key is released again:

  1. Nothing.

When mute is on and mute key OR any other key is pressed (except for the buttons that only handle I/O operation):

  1. The LED on the button start flashing.
  2. The first Mute off command is sent.
  3. Wait "Time between commands..." (if a second command is available).
  4. Second Mute off command is sent. (If available).
  5. Wait "The time from mute off..." and release keyboard.
  6. The LED on the button stop flashing.

When key is released again:

  1. Nothing.
  • Was this article helpful?