Skip to main content
Chat with Biamp tech support
Biamp Cornerstone

0-10 Volt control with Biamp control systems

Need to control some lighting dimmers that uses 0-10 Volt?

Well, if you do, the only product in the portfolio that had a direct 0-10V output was the Neets DelTa, but that is now discontinued.

So what you do instead is to use another third party devices which can translate to 0-10V.

One example could be Extrons MLA VC10 Plus, which is controlled with simple RS232 commands.

Another example could be the FNIP-RGB/010 from P5 Futurenow that can do 4 channels of 0-10V dimming and uses LAN for communication with the control system. 

Both devices are available in the device driver database.

mlavc10plus-lg.jpgFNIP_RGB010_angle_640.jpg

 

  • Was this article helpful?