Skip to main content
Chat with Biamp tech support
Biamp Cornerstone

Updating the app on an Apprimo Touch Panel

Watch this short video to get to know how to update the app on a Biamp Apprimo Touch 4, 7, and 10" / Neets Touch Panel 4, 7 & 10".

Procedure is the same for the entire range, and so is the firmware file. It works across the, 4", 7" and 10" screens. See where to find the latest app update file below!

You need to uninstall the app and install the newer one from an external USB drive.

You can download the latest .APK app for the 4", 7", and 10" Touch Panel product right here:

BiampControl_app-release-1.6.5

BiampControl_App_Beta-1.6.6

 

NOTE: If you experience that the app doesn't connect to the control system:

1.  Go to the pinhole menu > Application Settings > Biamp Control

2. Click the 'Clear data' button and confirm. This will take you to the boot screen again.

3. Then enter the pin hole menu again and re-enter the 'Control system address' i.e. 192.168.10.100 and press 'OK'.

4. Select 'Connect to the control system' and it should be establishing the connection and load the GUI.

  • Was this article helpful?