Skip to main content
Biamp Cornerstone

Administration

This article describes the Administration screen of the Evoko Liso. This screen displays real-time information about the Liso and provides device management, network configuration, and diagnostic tool options. It is accessed from the Admin Log In text in the bottom-right corner of the Screen Reporting screen.

This screen can only be accessed by Admin users, and requires authentication via PIN or RFID.

 

Administration

This screen shows the current wireless connection status, the ping time between the Liso and the Evoko Home server, the Liso's IP and MAC address, and the IP address and port of the Evoko Home server.

 

Copy logs to USB

This copies the Evoko Liso logs to a connected USB drive.

  • The drive must be FAT32 formatted.

 

Update via USB

This updates the Evoko Liso using a Liso Device Upgrade firmware package.

 

Information

This screen shows information about the Evoko Liso device and its configuration. This includes:

  • Firmware version
  • Last reboot time
  • Time zone
  • NTP server
  • Device IP and MAC address
  • Evoko Home IP address
  • Global Settings: the proximity sensor and PIN length settings as defined in Global Settings
  • Local Settings: the device settings as defined in the Room Settings

 

 

Reboot Now

This reboots the Evoko Liso.

 

Network

This allows you to reconfigure the Evoko Liso setting for the wired Ethernet or wireless connection.

 

Change Room

This allows you to reassign the Evoko Liso to another room in the organization.

 

Server IP

This allows you to reconfigure the Evoko Liso setting for the static IP address of the Evoko Home server.

 

Diagnostics

This allows you to test the Evoko Liso hardware:

  • Red, Green, Yellow, and White (logo) LEDs
  • Proximity sensor
  • LAN and WiFi connectivity (if present)
  • LCD panel and touch screen
  • NFC connectivity (requires RFID card)
  • Ping Google, Evoko Home, NTP server
  • Was this article helpful?