Skip to main content
Chat with Biamp tech support
Biamp Cornerstone

How do I upload to the controller

Upload can be done in two ways, either USB via the USB on the front of all our products or through LAN.

Upload via USB

USB is the fastest method and all you need is a USB mini-B connector.

USB Mini B.png

When you've connected the USB to the controller a smiley appears in the lower right hand corner

Connected.png

Then press the Upload project button or F5 to upload the project.

Upload.png

Upload via LAN

To upload through the network, press Upload Project or F5 and choose start when you see the LAN connector.

UploadLAN.png

 

Now choose the controller you wish to upload to, but be certain to choose the correct one!

How do I upload to the controller 1.png

It is also possible to choose a custom IP, should the auto detection not discover your controller (IP rules are sometimes strict in corporate networks) 

If necessary then choose custom IP in the lower left corner and insert the IP address of your controller.

How do I upload to the controller 2.png

  • Was this article helpful?