Skip to main content
Chat with Biamp tech support
Biamp Cornerstone

Fixing all SVC-2 VoIP calls ending at 15 minutes

  1. Last updated
  2. Save as PDF

Wrench_Bld.png

 

This tech note explains what setting to toggle if you run into the issue of your Tesira VoIP endpoint terminating or being kicked from all calls at 15 minutes.  Long story short, you'll need to toggle the session timer.

  •   If the timer is on, try turning it off.
  •   If the timer is off, try turning it on.

 

Locating the setting in the software

Note that you must toggle to the "Advanced" view of the VoIP Control/Status block

SessionTimertoggle.png

 

Locating the setting in the Web GUI

Note to toggle to advanced.

SessionTimertoggleWebGui.png

 

If this issue persists after toggling this setting please reach out to Support for further troubleshooting.

 

Further reading

Biamp cornerstone VoIP Landing page